—— Custom cut-and-sew tops / Yiwu, China ——
Custom Tops Manufacturer for Private Label Collections
Develop T-shirts, tank tops, crop tops, halter tops, tube tops, polo shirts and Henley shirts from a tech pack, approved sample, reference images or a structured product brief.
Dingao supports pattern development, sampling, fabric and trim review, private label details, bulk production, inspection and packing for overseas brands and buying teams.
—— Project-dependent starting facts
Use these to decide whether to send a brief, not as an unconditional quotation.
Total
Top directions
Casual, fitted, fashion and collared routes.
By style and fabric
Pieces for MOQ
Final minimum may apply per style or color.
Clear brief required
Days at the fastest
Complex sourcing or revisions require more time.
After sample approval
Typical bulk days
Subject to material readiness and scheduling.
—— Choose the closest route
Seven top types, each with a different fit risk.
These are category routes rather than finished products. Product detail pages can be added when approved photos, style codes and specifications are ready.
01 / T-SHIRTS
Build around fit, jersey weight and neck stability.
Crew-neck, baby tee, regular, boxy, oversized, graphic and cropped directions.
- Key input: body width and length
- Key control: neck rib and shrinkage
02 / TANK TOPS
Control armhole shape, coverage and recovery.
Fitted rib, scoop-neck, high-neck, racerback and relaxed tank directions.
03 / CROP TOPS
Approve body length before refining decoration.
Baby tee, fitted crop, cropped T-shirt, longline and boxy silhouettes.
04 / HALTER TOPS
Resolve support, neckline coverage and stress points.
Tie-neck, fixed-strap, high-neck and open-back knitted directions.
05 / TUBE TOPS
Test the upper edge and return after stretch.
Straight, shaped, ruched, double-layer and lined strapless directions.
06 / POLO SHIRTS
Make collar, placket and fabric structure agree.
Pique, jersey, contrast-collar, uniform and casual polo directions.
07 / HENLEY SHIRTS
Engineer the placket before bulk production.
Short- or long-sleeve, regular, fitted and casual Henley directions.
—— Development starting points
Turn a visual reference into a production discussion.
The ranges below are planning references assembled from Dingao’s draft product notes and comparable B2B catalogs. They are not fixed Dingao specifications or quotations.
Everyday jersey route
Common planning range; heavier buyer-defined weights can be reviewed.
160-220 GSM
Silhouette
Fitted, regular, boxy or oversized
Fabric direction
Cotton jersey, cotton-stretch, polyester or nylon blend
Confirm first
Chest, body length, shoulder, neck opening and sleeve proportion
Watch during sampling
Neck recovery, shrinkage, torque, print handfeel and hem appearance
Jersey or rib route
Structure and stretch can move the workable weight outside this range.
140-220 GSM
Silhouette
Fitted, high-neck, scoop, racerback or relaxed
Fabric direction
Single jersey, 1×1 or 2×2 rib, modal or viscose blend, mesh
Confirm first
Armhole depth, neckline, strap width, body length and coverage
Watch during sampling
Binding stretch, armhole gape, opacity and shape recovery
Fitted or boxy crop route
Planning reference for selected knitted crop directions.
180-280 GSM
Silhouette
Baby tee, fitted crop, boxy crop or longline crop
Fabric direction
Cotton-stretch jersey, rib, interlock, modal or nylon blend
Confirm first
High-point-shoulder length, chest, hem opening and sleeve balance
Watch during sampling
Body-length tolerance, hem twist, recovery and opacity
Support-led fashion route
Choose weight after stretch, opacity, lining and coverage are agreed.
Buyer-defined
Silhouette
Tie-neck, fixed strap, straight tube, shaped, ruched or double-layer
Fabric direction
Stretch jersey, rib, modal or viscose blend, selected nylon blend
Confirm first
Neck strap, top opening, back exposure, support and lining
Watch during sampling
Stress points, rolling, slippage, grin-through, opacity and recovery
Pique or jersey route
Market-observed starting range; final structure and weight must be sourced.
170-240 GSM
Silhouette
Regular, slim, relaxed, uniform or sport-led
Fabric direction
Cotton pique, cotton blend, jersey or polyester blend
Confirm first
Collar shape, placket length, buttons, cuff, side slit and logo position
Watch during sampling
Collar roll, placket symmetry, button spacing and embroidery stability
Placket-led jersey route
Planning reference; heavier or rib structures require separate review.
140-220 GSM
Silhouette
Fitted, regular or relaxed; short or long sleeve
Fabric direction
Cotton jersey, cotton-stretch, rib, modal or viscose blend
Confirm first
Placket length and width, button count, neckline and sleeve finish
Watch during sampling
Placket reinforcement, puckering, button spacing and opening shape
- Final fabric composition, GSM, stretch, recovery, color, finish, test standard and material minimum are confirmed only after sourcing and sample review.
—— Development starting points
Turn a visual reference into a production discussion.
The ranges below are planning references assembled from Dingao’s draft product notes and comparable B2B catalogs. They are not fixed Dingao specifications or quotations.
1. Silhouette and measurements
Specify fitted, regular, relaxed, boxy or oversized, then provide key measurements or an approved sample.
- Chest and bottom opening
- Shoulder, armhole and sleeve dimensions
- Body length from high point shoulder
- Neck width, front drop and back drop
2. Fabric and color
Provide a confirmed specification where possible, or describe the target handfeel and end use without guessing a composition.
- Fiber composition and fabric structure
- Pantone or approved color standard
- GSM, stretch direction and recovery
- Shrinkage, pilling, colorfastness or other test requirements
3. Construction
Define the neckline, binding, seam, hem, lining, collar or placket that must be reproduced.
- Seam and stitch appearance
- Collar, placket, button and slit details
- Reinforcement and stress points
- Measurement tolerances and workmanship standard
4. Decoration and private label
Share artwork at final size and position, plus the intended technique. Feasibility depends on the selected fabric and design.
- Screen, transfer or other print direction
- Main, size and care labels
- Embroidery size and placement
- Hangtags and packaging artwork
5. Order and delivery conditions
Costing and scheduling require commercial details as well as a garment drawing.
- Quantity by style, color and size
- Required delivery date and destination
- Target market and size system
- Packing, testing and inspection requirements
—— Factory and Tops-specific evidence
Show the control point, not just the workshop.
Dingao uses fabric inspection, cutting checks, in-process inspection, finishing checks, finished-garment inspection, packing inspection and broken-needle control. Each control point is reviewed against the approved sample, measurement specification and order requirements.
Neckline and binding
Macro detail, even stitch, no mannequin required
Garment measurement
HPS length or chest measurement with readable tape
Placket construction
Polo or Henley close-up, inside and outside
Final and packing check
Approved sample, finished garment and packing reference
2015
Approx. 5,000 m2
Approx. 70
2 + 3
amfori BSCI
—— From brief to bulk
Each approval protects the next production step.
The working timeline starts from the relevant approval and material readiness, not from the first enquiry.
01
Brief and feasibility
Confirm product type, measurements, quantity, fabric direction, artwork, market and required date.
02
Material and sample scope
Agree what Dingao will source, what the sample must prove and what remains buyer-supplied.
03
Fit and detail approval
Record measurements, construction, color, artwork placement and every revision.
04
Pre-production confirmation
Approve the reference sample, bill of materials, labels, packing and order details.
05
Bulk, inspection and packing
Produce against the approved reference, complete defined checks and coordinate packing and delivery.
—— COMMERCIAL BOUNDARIES
Use conditions before numbers.
A valid quotation depends on the complete style and order context.
MOQ
Some custom orders can start from 100 pieces. Confirm whether the minimum applies per style, color or total order.
Sampling
Bulk production
Costing
Send product type, quantity, fabric, colors, size range, branding, packing, market and required date.
—— Before sampling
Questions buyers should resolve early.
These answers set a public boundary. Project-specific decisions still require a brief review.
Frequently Asked Questions
Dingao can review T-shirts, tank tops, crop tops, halter tops, tube tops, polo shirts and Henley shirts. Feasibility depends on the selected fabric, construction, quantity and required process.
No. They are planning references used to frame an enquiry. Final composition, structure, GSM, stretch, recovery, color, finish and testing requirements are confirmed after sourcing and sample review.
Some custom orders can start from 100 pieces. The workable minimum depends on style, fabric, color, process and material availability, and may apply per style or color.
Yes. You can start with an approved sample, reference images, sketches or a structured brief. Clear measurements, quantity, fabric direction and target date make the review more useful.
Chest, body length from high point shoulder, bottom opening, armhole, neckline and fabric recovery are common starting points. Halter and tube styles also need support, coverage and upper-edge decisions.
Brand labels, size and care labels, hangtags, folding and packing can be reviewed. Artwork, materials, quantity and destination-market requirements must be confirmed before production.
Dingao uses fabric inspection, cutting checks, in-process inspection, finishing checks, finished-garment and packing inspection, plus broken-needle control. Product-specific tolerances should be agreed before bulk production.
Share the required standard, scope and destination market. Fabric availability and supporting documents must be confirmed for the exact material; this page does not claim that GRS, GOTS or OEKO-TEX certification is always held or available.
—— Start the review
Send enough detail for a useful first response.
We will review the product route, missing inputs and next sampling step. Final feasibility, MOQ, costing and timing are confirmed after the complete brief is checked.
- Top type, fit and reference
- Quantity by style and color
- Fabric, branding and packing direction
- Target market and required date